IBMIROC-MIB DEFINITIONS ::= BEGIN ------------------------------------------------------------------ -- IBM Routing Code (IROC) Enterprise MIB (SNMP Version 1 Format) ------------------------------------------------------------------ -- -- This MIB defines the enterprise specific management -- objects for functions that are common to the base IBM -- routing software. -- -- This MIB is defined in the SNMP version 1 SMI format. -- -- March 10, 1998 -- -- Contact Information: -- -- Randy Worzella -- IBM Corp. -- G420/664 -- Research Triangle Park, NC 27709 -- -- phone: 919-254-2202 -- email: worzella@ralvm29.vnet.ibm.com -- ------------------------------------------------------------------ IMPORTS enterprises, Counter, Gauge, TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1213-MIB frCircuitIfIndex, frCircuitDlci FROM RFC1315-MIB proResMemHeapTotal, proResMemHeapNeverAlloc, proElsSubSysEventMsg FROM PROTEON-MIB TRAP-TYPE FROM RFC-1215 OBJECT-TYPE FROM RFC-1212; -- Path to ibmIROC ibm OBJECT IDENTIFIER ::= { enterprises 2 } ibmProd OBJECT IDENTIFIER ::= { ibm 6 } ibmIROC OBJECT IDENTIFIER ::= { ibmProd 119 } ------------------------------------------------------------------ -- Textual Conventions ------------------------------------------------------------------ MacAddressNCIROC ::= OCTET STRING (SIZE(6)) -- 802 MAC addr in non-canonical format ------------------------------------------------------------------ -- IBM IROC Anchor ------------------------------------------------------------------ ibmIROCadmin OBJECT IDENTIFIER ::= { ibmIROC 1 } ibmIROCsystem OBJECT IDENTIFIER ::= { ibmIROC 2 } ibmIROChardware OBJECT IDENTIFIER ::= { ibmIROC 3 } ibmIROCrouting OBJECT IDENTIFIER ::= { ibmIROC 4 } ibmIROCswitching OBJECT IDENTIFIER ::= { ibmIROC 5 } ibmIROCtraps OBJECT IDENTIFIER ::= { ibmIROC 6 } ibmIROCconfig OBJECT IDENTIFIER ::= { ibmIROC 7 } ------------------------------------------------------------------ -- IBM IROC Administrative ------------------------------------------------------------------ ibmIROCadminproducts OBJECT IDENTIFIER ::= { ibmIROCadmin 1 } ibmIROCadminOID OBJECT IDENTIFIER ::= { ibmIROCadmin 2 } ibmIROCadminDebug OBJECT IDENTIFIER ::= { ibmIROCadmin 3 } ------------------------------------------------------------------ -- IBM IROC System ------------------------------------------------------------------ ibmIROCsystemInfo OBJECT IDENTIFIER ::= { ibmIROCsystem 1 } ibmIROCcfgInfo OBJECT IDENTIFIER ::= { ibmIROCsystem 2 } ------------------------------------------------------------------ -- IBM IROC Hardware ------------------------------------------------------------------ ibmIROChardwareInfo OBJECT IDENTIFIER ::= { ibmIROChardware 1 } ------------------------------------------------------------------ -- IBM IROC Routing -- -- NOTES: ibmIROCrouting 1 is reserved -- ------------------------------------------------------------------ ibmIROCroutingppp OBJECT IDENTIFIER ::= { ibmIROCrouting 2 } ibmIROCroutingdlsw OBJECT IDENTIFIER ::= { ibmIROCrouting 3 } ibmIROCroutingfr OBJECT IDENTIFIER ::= { ibmIROCrouting 4 } ibmIROCroutingRlan OBJECT IDENTIFIER ::= { ibmIROCrouting 5 } ibmIROCroutingDialOut OBJECT IDENTIFIER ::= { ibmIROCrouting 6 } ------------------------------------------------------------------ -- IBM IROC Switching ------------------------------------------------------------------ -- Nothing defined yet !! ------------------------------------------------------------------ -- IBM IROC Config ------------------------------------------------------------------ ibmIROCconfigAuth OBJECT IDENTIFIER ::= { ibmIROCconfig 2 } ------------------------------------------------------------------ -- System Information ------------------------------------------------------------------ ------------------------------------------------------------------ -- SNMP Agent Status ------------------------------------------------------------------ ibmIROCAgentDebug OBJECT IDENTIFIER ::= { ibmIROCadminDebug 1 } agentMemUse OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the current amount (in bytes) of dynamic memory allocated and in use by the SNMP agent. It is primarily in place to watch for any potential 'memory leaks', whereby, memory is allocated but never freed. This condition is indicated by an ever increasing value for this gauge." ::= { ibmIROCAgentDebug 1 } ------------------------------------------------------------------ -- Hardware Information ------------------------------------------------------------------ platformType OBJECT-TYPE SYNTAX INTEGER { plat-other (1), plat-mss-8210 (2), plat-mss-blade (3), plat-mss-client (4), plat-2216-400 (5), plat-2210-1s4 (6), plat-2210-1s8 (7), plat-2210-1u4 (8), plat-2210-1u8 (9), plat-2210-24e (10), plat-2210-24m (11), plat-2210-24t (12), plat-2210-14t (13), plat-2210-125 (14), plat-2210-127 (15), plat-2210-121 (16), plat-2210-12t (17), plat-2210-126 (18), plat-2210-128 (19), plat-2210-122 (20), plat-2210-12e (21), plat-2220-200 (22), plat-3746-MAE (23), plat-mss-domain-client (24), plat-mss-8210V2 (25), plat-mss-bladeV2 (26) } ACCESS read-only STATUS mandatory DESCRIPTION "The platform type containing this SNMP agent." ::= { ibmIROChardwareInfo 1 } platformDRAMSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of dynamic RAM (Megabytes) installed on this platform. DRAM is used to contain the routing software and associated data areas." ::= { ibmIROChardwareInfo 2 } platformFLASHSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of flash memory (Megabytes) installed on this platform. Flash is used to hold configuration and software code loads, one pair of which can be loaded and made active on the platform. Some platforms do not have FLASH memory, which is indicated by a value of 0." ::= { ibmIROChardwareInfo 3 } platformNVRAMSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of non-volatile memory (Kilobytes) installed on this platform. NVRAM, sometimes referred to as SRAM, is used to hold the active configuration records. Some platforms do not have NVRAM memory, which is indicated by a value of 0." ::= { ibmIROChardwareInfo 4 } platformFeatureSlot OBJECT-TYPE SYNTAX INTEGER { none (1), isdn-BRI-ST (2), isdn-PRI-E1-120 (3), isdn-PRI-E1-75 (4), isdn-PRI-T1J1 (5), atm-155 (6), atm-25 (7), serial-wan-4port (8), serial-wan-8port (9), modem-4port (10), modem-8port (11), isdn-BRI-4port-ST (12), isdn-BRI-4port-U (13) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of adapter installed in the feature slot of the 2210 platform. Note that not all adapter types listed above are currently supported, nor does this imply they will be supported in the future." ::= { ibmIROChardwareInfo 5 } ------------------------------------------------------------------ -- Routing Information ------------------------------------------------------------------ ------------------------------------------------------------------ -- PPP Protocol and Control Protocol Statistics ------------------------------------------------------------------ pppProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF PppProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of protocol and control protocol statistics for protocols supported by PPP." ::= { ibmIROCroutingppp 1 } pppProtocolEntry OBJECT-TYPE SYNTAX PppProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of protocol and control protocol information for a specific protocol supported by PPP." INDEX { pppProtocolIfIndex, pppProtocolId } ::= { pppProtocolTable 1 } PppProtocolEntry ::= SEQUENCE { pppProtocolIfIndex INTEGER, pppProtocolId INTEGER, pppProtocolRegistered INTEGER, pppProtocolState INTEGER, pppProtocolPreviousState INTEGER, pppProtocolLastTimeChange TimeTicks, pppProtocolCtlInRejects Counter, pppProtocolCtlInOctets Counter, pppProtocolCtlInPkts Counter, pppProtocolCtlOutOctets Counter, pppProtocolCtlOutPkts Counter, pppProtocolDataInRejects Counter, pppProtocolDataInOctets Counter, pppProtocolDataInPkts Counter, pppProtocolDataOutOctets Counter, pppProtocolDataOutPkts Counter } pppProtocolIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for an interface running PPP. This object is the same as the MIB-II ifIndex object." ::= { pppProtocolEntry 1 } pppProtocolId OBJECT-TYPE SYNTAX INTEGER { ip (1), decnet (2), ipx (3), bridge (4), appletalk (5), osi (6), appnhpr (7), appnisr (8), vines (9), compression (10), netbios (11), netbios-forw (12), bandwidth-allocation (13), encryption (14) } ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier of a protocol supported by PPP." ::= { pppProtocolEntry 2 } pppProtocolRegistered OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether this protocol is registered with PPP." ::= { pppProtocolEntry 3 } pppProtocolState OBJECT-TYPE SYNTAX INTEGER { closed (1), listen (2), requestSent (3), ackReceived (4), ackSent (5), opened (6), termSent (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The value identifies the present state of the protocol." ::= { pppProtocolEntry 4 } pppProtocolPreviousState OBJECT-TYPE SYNTAX INTEGER { closed (1), listen (2), requestSent (3), ackReceived (4), ackSent (5), opened (6), termSent (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the protocol prior to the state given by pppProtocolState. These states are the same as those described for the object pppProtocolState. " ::= { pppProtocolEntry 5 } pppProtocolLastTimeChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the last protocol state change occurred." ::= { pppProtocolEntry 6 } ------------------------------------------------------------------ -- PPP Network Control Protocol Statistics ------------------------------------------------------------------ pppProtocolCtlInRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of a control protocol protocol-reject packets received over the PPP interface." ::= { pppProtocolEntry 7 } pppProtocolCtlInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of control protocol octets received over the PPP interface." ::= { pppProtocolEntry 8 } pppProtocolCtlInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of control protocol packets received over the PPP interface." ::= { pppProtocolEntry 9 } pppProtocolCtlOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of control protocol octets transmitted over the PPP interface." ::= { pppProtocolEntry 10 } pppProtocolCtlOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of a control protocol packets transmitted over the PPP interface." ::= { pppProtocolEntry 11 } ------------------------------------------------------------------ -- PPP Protocol Statistics ------------------------------------------------------------------ pppProtocolDataInRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of protocol reject packets received over the PPP interface." ::= { pppProtocolEntry 12 } pppProtocolDataInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of protocol octets received over the PPP interface." ::= { pppProtocolEntry 13 } pppProtocolDataInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of protocol packets received over the PPP interface." ::= { pppProtocolEntry 14 } pppProtocolDataOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of protocol octets transmitted over the PPP interface." ::= { pppProtocolEntry 15 } pppProtocolDataOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of protocol packets transmitted over the PPP interface." ::= { pppProtocolEntry 16 } ------------------------------------------------------------------ -- PPP Link Error Statistics ------------------------------------------------------------------ pppLinkErrTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkErrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of link error statistics." ::= { ibmIROCroutingppp 2 } pppLinkErrEntry OBJECT-TYPE SYNTAX PppLinkErrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of link error information for a specific interface." INDEX { pppLinkErrIfIndex } ::= { pppLinkErrTable 1 } PppLinkErrEntry ::= SEQUENCE { pppLinkErrIfIndex INTEGER, pppLinkErrBadAddrs Counter, pppLinkErrLastBadAddr OCTET STRING, pppLinkErrBadCtrls Counter, pppLinkErrLastBadCtrl OCTET STRING, pppLinkErrUnkProtos Counter, pppLinkErrLastUnkProto OCTET STRING, pppLinkErrInvProtos Counter, pppLinkErrLastInvProto OCTET STRING, pppLinkErrConfigTOs Counter, pppLinkErrTermTOs Counter } pppLinkErrIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for an interface running PPP. This object is the same as the MIB-II ifIndex object." ::= { pppLinkErrEntry 1 } pppLinkErrBadAddrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received with a bad Address field." ::= { pppLinkErrEntry 2 } pppLinkErrLastBadAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The last bad Address field received." ::= { pppLinkErrEntry 3 } pppLinkErrBadCtrls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received with a bad Control field." ::= { pppLinkErrEntry 4 } pppLinkErrLastBadCtrl OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) ACCESS read-only STATUS mandatory DESCRIPTION "The last bad Control field received." ::= { pppLinkErrEntry 5 } pppLinkErrUnkProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received with a Protocol identifier not registered with PPP." ::= { pppLinkErrEntry 6 } pppLinkErrLastUnkProto OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The last unknown Protocol identifier received." ::= { pppLinkErrEntry 7 } pppLinkErrInvProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received with a Protocol identifier that is not valid." ::= { pppLinkErrEntry 8 } pppLinkErrLastInvProto OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The last invalid Protocol identifier received." ::= { pppLinkErrEntry 9 } pppLinkErrConfigTOs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of timeouts that occurred on this link when sending a config request to open the PPP link." ::= { pppLinkErrEntry 10 } pppLinkErrTermTOs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of timeouts that occurred on this link when sending a terminate request to close the PPP link." ::= { pppLinkErrEntry 11 } ------------------------------------------------------------------ -- PPP Link Control Protocol Statistics ------------------------------------------------------------------ pppLCProtoTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLCProtoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of link control protocol statistics." ::= { ibmIROCroutingppp 3 } pppLCProtoEntry OBJECT-TYPE SYNTAX PppLCProtoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of link control protocol information for a specific interface." INDEX { pppLCProtoIfIndex } ::= { pppLCProtoTable 1 } PppLCProtoEntry ::= SEQUENCE { pppLCProtoIfIndex INTEGER, pppLCProtoState INTEGER, pppLCProtoPreviousState INTEGER, pppLCProtoLastTimeChange TimeTicks, pppLCProtoOutPackets Counter, pppLCProtoOutOctets Counter, pppLCProtoOutCRs Counter, pppLCProtoOutCAs Counter, pppLCProtoOutCNs Counter, pppLCProtoOutCRejs Counter, pppLCProtoOutTRs Counter, pppLCProtoOutTAs Counter, pppLCProtoOutCodeRejs Counter, pppLCProtoOutEchoReqs Counter, pppLCProtoOutEchoReps Counter, pppLCProtoOutDiscReqs Counter, pppLCProtoOutResetReqs Counter, pppLCProtoOutResetAcks Counter, pppLCProtoOutIdents Counter, pppLCProtoOutTimeRemains Counter, pppLCProtoInRejects Counter, pppLCProtoInPackets Counter, pppLCProtoInOctets Counter, pppLCProtoInCRs Counter, pppLCProtoInCAs Counter, pppLCProtoInCNs Counter, pppLCProtoInCRejs Counter, pppLCProtoInTRs Counter, pppLCProtoInTAs Counter, pppLCProtoInCodeRejs Counter, pppLCProtoInEchoReqs Counter, pppLCProtoInEchoReps Counter, pppLCProtoInDiscReqs Counter, pppLCProtoInResetReqs Counter, pppLCProtoInResetAcks Counter, pppLCProtoInIdents Counter, pppLCProtoInTimeRemains Counter } pppLCProtoIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for an interface running PPP. This object is the same as the MIB-II ifIndex object." ::= { pppLCProtoEntry 1 } pppLCProtoState OBJECT-TYPE SYNTAX INTEGER { closed (1), listen (2), requestSent (3), ackReceived (4), ackSent (5), opened (6), termSent (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The value identifies the present state of the PPP link. The closed(1) state indicates that the link is down and there is no attempt being made to open it and all connection requests from peers are rejected. In listen(2) state, the link is down and there is no attempt being made to open it, however, all the connection requests from peers are accepted. The state request-sent(3) indicates that an active attempt is being made to open the link. In this state, a Configure-request packet has been sent and no Configure-Ack has yet been received. In the state ack-received(4), a Configure-request packet has been sent and Configure-Ack packet has been received. The state ack-sent(5) indicates that a Congigure-request and Configure-Ack packets have been sent and Configure-Ack has not yet been received. The opened(6) state implies that a connection has been made and data may be sent. The state term-sent(7) indicates that an attempt is being made to close the connection and that a Terminate-request packet has been sent and a Terminate-Ack packet has not yet been received. " ::= { pppLCProtoEntry 2 } pppLCProtoPreviousState OBJECT-TYPE SYNTAX INTEGER { closed (1), listen (2), requestSent (3), ackReceived (4), ackSent (5), opened (6), termSent (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the PPP link prior to the state given by pppLCProtoState. These states are the same as those described for the object pppLCProtoState. " ::= { pppLCProtoEntry 3 } pppLCProtoLastTimeChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the last PPP link state change occurred." ::= { pppLCProtoEntry 4 } pppLCProtoOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP packets transmitted over the PPP interface." ::= { pppLCProtoEntry 5 } pppLCProtoOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP octets transmitted over the PPP interface." ::= { pppLCProtoEntry 6 } pppLCProtoOutCRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-requests transmitted over the PPP interface." ::= { pppLCProtoEntry 7 } pppLCProtoOutCAs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-acks transmitted over the PPP interface." ::= { pppLCProtoEntry 8 } pppLCProtoOutCNs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-nacks transmitted over the PPP interface." ::= { pppLCProtoEntry 9 } pppLCProtoOutCRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-rejects transmitted over the PPP interface." ::= { pppLCProtoEntry 10 } pppLCProtoOutTRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Terminate-requests transmitted over the PPP interface." ::= { pppLCProtoEntry 11 } pppLCProtoOutTAs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Terminate-acks transmitted over the PPP interface." ::= { pppLCProtoEntry 12 } pppLCProtoOutCodeRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Code-rejects transmitted over the PPP interface." ::= { pppLCProtoEntry 13 } pppLCProtoOutEchoReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Echo-requests transmitted over the PPP interface." ::= { pppLCProtoEntry 14 } pppLCProtoOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Echo-replies transmitted over the PPP interface." ::= { pppLCProtoEntry 15 } pppLCProtoOutDiscReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Discard-requests transmitted over the PPP interface." ::= { pppLCProtoEntry 16 } pppLCProtoOutResetReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Reset-requests transmitted over the PPP interface." ::= { pppLCProtoEntry 17 } pppLCProtoOutResetAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Reset-Acks transmitted over the PPP interface." ::= { pppLCProtoEntry 18 } pppLCProtoOutIdents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Identification packets transmitted over the PPP interface." ::= { pppLCProtoEntry 19 } pppLCProtoOutTimeRemains OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Time-Remaining packets transmitted over the PPP interface." ::= { pppLCProtoEntry 20 } pppLCProtoInRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of a LCP protocol-reject packets received over the PPP interface." ::= { pppLCProtoEntry 21 } pppLCProtoInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP packets received over the PPP interface." ::= { pppLCProtoEntry 22 } pppLCProtoInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP octets received over the PPP interface." ::= { pppLCProtoEntry 23 } pppLCProtoInCRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-requests received over the PPP interface." ::= { pppLCProtoEntry 24 } pppLCProtoInCAs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-acks received over the PPP interface." ::= { pppLCProtoEntry 25 } pppLCProtoInCNs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-nacks received over the PPP interface." ::= { pppLCProtoEntry 26 } pppLCProtoInCRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Config-rejects received over the PPP interface." ::= { pppLCProtoEntry 27 } pppLCProtoInTRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Terminate-requests received over the PPP interface." ::= { pppLCProtoEntry 28 } pppLCProtoInTAs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Terminate-acks received over the PPP interface." ::= { pppLCProtoEntry 29 } pppLCProtoInCodeRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Code-rejects received over the PPP interface." ::= { pppLCProtoEntry 30 } pppLCProtoInEchoReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Echo-Requests received over the PPP interface." ::= { pppLCProtoEntry 31 } pppLCProtoInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Echo-replies received over the PPP interface." ::= { pppLCProtoEntry 32 } pppLCProtoInDiscReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Discard-requests received over the PPP interface." ::= { pppLCProtoEntry 33 } pppLCProtoInResetReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Reset-requests received over the PPP interface." ::= { pppLCProtoEntry 34 } pppLCProtoInResetAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Reset-Acks received over the PPP interface." ::= { pppLCProtoEntry 35 } pppLCProtoInIdents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Identification packets received over the PPP interface." ::= { pppLCProtoEntry 36 } pppLCProtoInTimeRemains OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of LCP Time-Remaining packets received over the PPP interface." ::= { pppLCProtoEntry 37 } ------------------------------------------------------------------ -- PPP PAP Statistics ------------------------------------------------------------------ pppPAPTable OBJECT-TYPE SYNTAX SEQUENCE OF PppPAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of PAP statistics." ::= { ibmIROCroutingppp 4 } pppPAPEntry OBJECT-TYPE SYNTAX PppPAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of PAP information." INDEX { pppPAPIfIndex } ::= { pppPAPTable 1 } PppPAPEntry ::= SEQUENCE { pppPAPIfIndex INTEGER, pppPAPInPackets Counter, pppPAPInOctets Counter, pppPAPInRequests Counter, pppPAPInAcks Counter, pppPAPInNacks Counter, pppPAPOutPackets Counter, pppPAPOutOctets Counter, pppPAPOutRequests Counter, pppPAPOutAcks Counter, pppPAPOutNacks Counter } pppPAPIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for a PPP interface running PAP. This object is the same as the MIB-II ifIndex object." ::= { pppPAPEntry 1 } pppPAPInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP packets received over the PPP interface." ::= { pppPAPEntry 2 } pppPAPInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP octets received over the PPP interface." ::= { pppPAPEntry 3 } pppPAPInRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP requests received over the PPP interface." ::= { pppPAPEntry 4 } pppPAPInAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP acknowledgements received over the PPP interface." ::= { pppPAPEntry 5 } pppPAPInNacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP non-acknowledgements received over the PPP interface." ::= { pppPAPEntry 6 } pppPAPOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP packets sent over the PPP interface." ::= { pppPAPEntry 7 } pppPAPOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP octets sent over the PPP interface." ::= { pppPAPEntry 8 } pppPAPOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP requests sent over the PPP interface." ::= { pppPAPEntry 9 } pppPAPOutAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP acknowledgements sent over the PPP interface." ::= { pppPAPEntry 10 } pppPAPOutNacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of PAP non-acknowledgements sent over the PPP interface." ::= { pppPAPEntry 11 } ------------------------------------------------------------------ -- PPP CHAP Statistics ------------------------------------------------------------------ pppCHAPTable OBJECT-TYPE SYNTAX SEQUENCE OF PppCHAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of CHAP statistics." ::= { ibmIROCroutingppp 5 } pppCHAPEntry OBJECT-TYPE SYNTAX PppCHAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of CHAP information." INDEX { pppCHAPIfIndex } ::= { pppCHAPTable 1 } PppCHAPEntry ::= SEQUENCE { pppCHAPIfIndex INTEGER, pppCHAPInPackets Counter, pppCHAPInOctets Counter, pppCHAPInChallenges Counter, pppCHAPInResponses Counter, pppCHAPInSuccesses Counter, pppCHAPInFailures Counter, pppCHAPOutPackets Counter, pppCHAPOutOctets Counter, pppCHAPOutChallenges Counter, pppCHAPOutResponses Counter, pppCHAPOutSuccesses Counter, pppCHAPOutFailures Counter } pppCHAPIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for a PPP interface running CHAP. This object is the same as the MIB-II ifIndex object." ::= { pppCHAPEntry 1 } pppCHAPInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP packets received over the PPP interface." ::= { pppCHAPEntry 2 } pppCHAPInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP octets received over the PPP interface." ::= { pppCHAPEntry 3 } pppCHAPInChallenges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP challenges received over the PPP interface." ::= { pppCHAPEntry 4 } pppCHAPInResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP responses received over the PPP interface." ::= { pppCHAPEntry 5 } pppCHAPInSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP successes received over the PPP interface." ::= { pppCHAPEntry 6 } pppCHAPInFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP failures received over the PPP interface." ::= { pppCHAPEntry 7 } pppCHAPOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP packets sent over the PPP interface." ::= { pppCHAPEntry 8 } pppCHAPOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP octets sent over the PPP interface." ::= { pppCHAPEntry 9 } pppCHAPOutChallenges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP challenges sent over the PPP interface." ::= { pppCHAPEntry 10 } pppCHAPOutResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP responses sent over the PPP interface." ::= { pppCHAPEntry 11 } pppCHAPOutSuccesses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP successes sent over the PPP interface." ::= { pppCHAPEntry 12 } pppCHAPOutFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CHAP failures sent over the PPP interface." ::= { pppCHAPEntry 13 } ------------------------------------------------------------------ -- PPP SPAP Statistics ------------------------------------------------------------------ pppSPAPTable OBJECT-TYPE SYNTAX SEQUENCE OF PppSPAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of SPAP statistics." ::= { ibmIROCroutingppp 6 } pppSPAPEntry OBJECT-TYPE SYNTAX PppSPAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of SPAP information." INDEX { pppSPAPIfIndex } ::= { pppSPAPTable 1 } PppSPAPEntry ::= SEQUENCE { pppSPAPIfIndex INTEGER, pppSPAPInPackets Counter, pppSPAPInOctets Counter, pppSPAPInRequests Counter, pppSPAPInAcks Counter, pppSPAPInNacks Counter, pppSPAPInDialbacks Counter, pppSPAPInPleaseAuthenticates Counter, pppSPAPInChangePasswords Counter, pppSPAPInAlerts Counter, pppSPAPInAlertAcks Counter, pppSPAPOutPackets Counter, pppSPAPOutOctets Counter, pppSPAPOutRequests Counter, pppSPAPOutAcks Counter, pppSPAPOutNacks Counter, pppSPAPOutDialbacks Counter, pppSPAPOutPleaseAuthenticates Counter, pppSPAPOutChangePasswords Counter, pppSPAPOutAlerts Counter, pppSPAPOutAlertAcks Counter } pppSPAPIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for a PPP interface running SPAP. This object is the same as the MIB-II ifIndex object." ::= { pppSPAPEntry 1 } pppSPAPInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP packets received over the PPP interface." ::= { pppSPAPEntry 2 } pppSPAPInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP octets received over the PPP interface." ::= { pppSPAPEntry 3 } pppSPAPInRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP responses received over the PPP interface." ::= { pppSPAPEntry 4 } pppSPAPInAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP acknowledgements received over the PPP interface." ::= { pppSPAPEntry 5 } pppSPAPInNacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP non-acknowledgements received over the PPP interface." ::= { pppSPAPEntry 6 } pppSPAPInDialbacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP dialbacks received over the PPP interface." ::= { pppSPAPEntry 7 } pppSPAPInPleaseAuthenticates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP authenticate requests received over the PPP interface." ::= { pppSPAPEntry 8 } pppSPAPInChangePasswords OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP password changes received over the PPP interface." ::= { pppSPAPEntry 9 } pppSPAPInAlerts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP alerts received over the PPP interface." ::= { pppSPAPEntry 10 } pppSPAPInAlertAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP alert acknowledgements received over the PPP interface." ::= { pppSPAPEntry 11 } pppSPAPOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP packets sent over the PPP interface." ::= { pppSPAPEntry 12 } pppSPAPOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP octets sent over the PPP interface." ::= { pppSPAPEntry 13 } pppSPAPOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP responses sent over the PPP interface." ::= { pppSPAPEntry 14 } pppSPAPOutAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP acknowledgements sent over the PPP interface." ::= { pppSPAPEntry 15 } pppSPAPOutNacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP non-acknowledgements sent over the PPP interface." ::= { pppSPAPEntry 16 } pppSPAPOutDialbacks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP dialbacks sent over the PPP interface." ::= { pppSPAPEntry 17 } pppSPAPOutPleaseAuthenticates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP authenticate requests sent over the PPP interface." ::= { pppSPAPEntry 18 } pppSPAPOutChangePasswords OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP password changes sent over the PPP interface." ::= { pppSPAPEntry 19 } pppSPAPOutAlerts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP alerts sent over the PPP interface." ::= { pppSPAPEntry 20 } pppSPAPOutAlertAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SPAP alert acknowledgements sent over the PPP interface." ::= { pppSPAPEntry 21 } ------------------------------------------------------------------ -- PPP Bandwidth Allocation Protocol (BAP) Statistics ------------------------------------------------------------------ pppBAPTable OBJECT-TYPE SYNTAX SEQUENCE OF PppBAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of BAP protocol statistics." ::= { ibmIROCroutingppp 7 } pppBAPEntry OBJECT-TYPE SYNTAX PppBAPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of BAP information." INDEX { pppBAPIfIndex } ::= { pppBAPTable 1 } PppBAPEntry ::= SEQUENCE { pppBAPIfIndex INTEGER, pppBAPInCallReqs Counter, pppBAPInCallAcks Counter, pppBAPInCallNaks Counter, pppBAPInCallRejs Counter, pppBAPInCallBackReqs Counter, pppBAPInCallBackAcks Counter, pppBAPInCallBackNaks Counter, pppBAPInCallBackRejs Counter, pppBAPInDropReqs Counter, pppBAPInDropAcks Counter, pppBAPInDropNaks Counter, pppBAPInDropRejs Counter, pppBAPInStatSuccs Counter, pppBAPInStatFails Counter, pppBAPOutCallReqs Counter, pppBAPOutCallAcks Counter, pppBAPOutCallNaks Counter, pppBAPOutCallRejs Counter, pppBAPOutCallBackReqs Counter, pppBAPOutCallBackAcks Counter, pppBAPOutCallBackNaks Counter, pppBAPOutCallBackRejs Counter, pppBAPOutDropReqs Counter, pppBAPOutDropAcks Counter, pppBAPOutDropNaks Counter, pppBAPOutDropRejs Counter, pppBAPOutStatSuccs Counter, pppBAPOutStatFails Counter } pppBAPIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for a PPP interface running BAP. This object is the same as the MIB-II ifIndex object." ::= { pppBAPEntry 1 } pppBAPInCallReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Call Request packets received over the PPP interface." ::= { pppBAPEntry 2 } pppBAPInCallAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Call Acknowledgement packets received over the PPP interface." ::= { pppBAPEntry 3 } pppBAPInCallNaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Call Nak packets received over the PPP interface." ::= { pppBAPEntry 4 } pppBAPInCallRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Call Reject packets received over the PPP interface." ::= { pppBAPEntry 5 } pppBAPInCallBackReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming CallBack Request packets received over the PPP interface." ::= { pppBAPEntry 6 } pppBAPInCallBackAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming CallBack Acknowledgement packets received over the PPP interface." ::= { pppBAPEntry 7 } pppBAPInCallBackNaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming CallBack Nak packets received over the PPP interface." ::= { pppBAPEntry 8 } pppBAPInCallBackRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming CallBack Reject packets received over the PPP interface." ::= { pppBAPEntry 9 } pppBAPInDropReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Drop Request packets received over the PPP interface." ::= { pppBAPEntry 10 } pppBAPInDropAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Drop Acknowledgement packets received over the PPP interface." ::= { pppBAPEntry 11 } pppBAPInDropNaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Drop Nak packets received over the PPP interface." ::= { pppBAPEntry 12 } pppBAPInDropRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Drop Reject packets received over the PPP interface." ::= { pppBAPEntry 13 } pppBAPInStatSuccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Call Status Success packets received over the PPP interface." ::= { pppBAPEntry 14 } pppBAPInStatFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP incoming Call Status Fail packets received over the PPP interface." ::= { pppBAPEntry 15 } pppBAPOutCallReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Call Request packets sent over the PPP interface." ::= { pppBAPEntry 16 } pppBAPOutCallAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Call Acknowledgement packets sent over the PPP interface." ::= { pppBAPEntry 17 } pppBAPOutCallNaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Call Nak packets sent over the PPP interface." ::= { pppBAPEntry 18 } pppBAPOutCallRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Call Reject packets sent over the PPP interface." ::= { pppBAPEntry 19 } pppBAPOutCallBackReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing CallBack Request packets sent over the PPP interface." ::= { pppBAPEntry 20 } pppBAPOutCallBackAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing CallBack Acknowledgement packets sent over the PPP interface." ::= { pppBAPEntry 21 } pppBAPOutCallBackNaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing CallBack Nak packets sent over the PPP interface." ::= { pppBAPEntry 22 } pppBAPOutCallBackRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing CallBack Reject packets sent over the PPP interface." ::= { pppBAPEntry 23 } pppBAPOutDropReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Drop Request packets sent over the PPP interface." ::= { pppBAPEntry 24 } pppBAPOutDropAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Drop Acknowledgement packets sent over the PPP interface." ::= { pppBAPEntry 25 } pppBAPOutDropNaks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Drop Nak packets sent over the PPP interface." ::= { pppBAPEntry 26 } pppBAPOutDropRejs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Drop Reject packets sent over the PPP interface." ::= { pppBAPEntry 27 } pppBAPOutStatSuccs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Call Status Success packets sent over the PPP interface." ::= { pppBAPEntry 28 } pppBAPOutStatFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of BAP outgoing Call Status Fail packets sent over the PPP interface." ::= { pppBAPEntry 29 } ------------------------------------------------------------------ -- PPP Compression Protocol and Control Protocol Statistics ------------------------------------------------------------------ pppCPTable OBJECT-TYPE SYNTAX SEQUENCE OF PppCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of compression protocol and control protocol statistics." ::= { ibmIROCroutingppp 8 } pppCPEntry OBJECT-TYPE SYNTAX PppCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of CP and CCP information." INDEX { pppCPIfIndex } ::= { pppCPTable 1 } PppCPEntry ::= SEQUENCE { pppCPIfIndex INTEGER, pppCPInCompressedOctets Counter, pppCPInInCompressablePkts Counter, pppCPInDestroyeds Counter, pppCPInCopies Counter, pppCPOutCompressedOctets Counter, pppCPOutInCompressablePkts Counter, pppCPOutDestroyeds Counter, pppCPOutCopies Counter, pppCCPInResetReqs Counter, pppCCPInResetAcks Counter, pppCCPInDictResets Counter, pppCCPOutResetReqs Counter, pppCCPOutResetAcks Counter, pppCCPOutDictResets Counter, pppCCPPacketDiscards Counter, pppCCPOctetDiscards Counter } pppCPIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for a PPP interface running CP. This object is the same as the MIB-II ifIndex object." ::= { pppCPEntry 1 } pppCPInCompressedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP incoming compressed octets received over the PPP interface." ::= { pppCPEntry 2 } pppCPInInCompressablePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP incoming incompressable packets received over the PPP interface." ::= { pppCPEntry 3 } pppCPInDestroyeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP incoming packets discarded for this PPP interface." ::= { pppCPEntry 4 } pppCPInCopies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP incoming packets requiring a copy to a spare buffer to correct alignment." ::= { pppCPEntry 5 } pppCPOutCompressedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP outgoing compressed octets sent over the PPP interface." ::= { pppCPEntry 6 } pppCPOutInCompressablePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP outgoing incompressable packets sent over the PPP interface." ::= { pppCPEntry 7 } pppCPOutDestroyeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP outgoing packets discarded for this PPP interface." ::= { pppCPEntry 8 } pppCPOutCopies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CP outgoing packets requiring a copy to a spare buffer to correct alignment." ::= { pppCPEntry 9 } pppCCPInResetReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP incoming Reset request packets received over the PPP interface." ::= { pppCPEntry 10 } pppCCPInResetAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP incoming Reset Acknowledgement packets received over the PPP interface." ::= { pppCPEntry 11 } pppCCPInDictResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP incoming Dictionary Reset packets received over the PPP interface." ::= { pppCPEntry 12 } pppCCPOutResetReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP outgoing Reset request packets sent over the PPP interface." ::= { pppCPEntry 13 } pppCCPOutResetAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP outgoing Reset Acknowledgement packets sent over the PPP interface." ::= { pppCPEntry 14 } pppCCPOutDictResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP outgoing Dictionary Reset packets sent over the PPP interface." ::= { pppCPEntry 15 } pppCCPPacketDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP incoming packet discards occuring for this PPP interface." ::= { pppCPEntry 16 } pppCCPOctetDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of CCP outgoing packet discards occuring for this PPP interface." ::= { pppCPEntry 17 } ------------------------------------------------------------------ -- PPP Encryption Protocol and Control Protocol Statistics ------------------------------------------------------------------ pppEPTable OBJECT-TYPE SYNTAX SEQUENCE OF PppEPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of encryption protocol and control protocol statistics." ::= { ibmIROCroutingppp 9 } pppEPEntry OBJECT-TYPE SYNTAX PppEPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of EP and ECP information." INDEX { pppEPIfIndex } ::= { pppEPTable 1 } PppEPEntry ::= SEQUENCE { pppEPIfIndex INTEGER, pppEPInEncryptedOctets Counter, pppEPInDestroyeds Counter, pppEPInCopies Counter, pppEPOutEncryptedOctets Counter, pppEPOutDestroyeds Counter, pppEPOutCopies Counter, pppECPInResetReqs Counter, pppECPInResetAcks Counter, pppECPInDictResets Counter, pppECPOutResetReqs Counter, pppECPOutResetAcks Counter, pppECPOutDictResets Counter, pppECPPacketDiscards Counter, pppECPOctetDiscards Counter } pppEPIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for a PPP interface running EP. This object is the same as the MIB-II ifIndex object." ::= { pppEPEntry 1 } pppEPInEncryptedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of EP incoming encrypted octets received over the PPP interface." ::= { pppEPEntry 2 } pppEPInDestroyeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of EP incoming packets discarded for this PPP interface." ::= { pppEPEntry 3 } pppEPInCopies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of EP incoming packets requiring a copy to a spare buffer to correct alignment." ::= { pppEPEntry 4 } pppEPOutEncryptedOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of EP outgoing encrypted octets sent over the PPP interface." ::= { pppEPEntry 5 } pppEPOutDestroyeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of EP outgoing packets discarded for this PPP interface." ::= { pppEPEntry 6 } pppEPOutCopies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of EP outgoing packets requiring a copy to a spare buffer to correct alignment." ::= { pppEPEntry 7 } pppECPInResetReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP incoming Reset request packets received over the PPP interface." ::= { pppEPEntry 8 } pppECPInResetAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP incoming Reset Acknowledgement packets received over the PPP interface." ::= { pppEPEntry 9 } pppECPInDictResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP incoming Dictionary Reset packets received over the PPP interface." ::= { pppEPEntry 10 } pppECPOutResetReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP outgoing Reset request packets sent over the PPP interface." ::= { pppEPEntry 11 } pppECPOutResetAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP outgoing Reset Acknowledgement packets sent over the PPP interface." ::= { pppEPEntry 12 } pppECPOutDictResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP outgoing Dictionary Reset packets sent over the PPP interface." ::= { pppEPEntry 13 } pppECPPacketDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP incoming packet discards occuring for this PPP interface." ::= { pppEPEntry 14 } pppECPOctetDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ECP outgoing packet discards occuring for this PPP interface." ::= { pppEPEntry 15 } ------------------------------------------------------------------ -- DLSw Transport Connection Group Table ------------------------------------------------------------------ ibmdlswTConnGroupOperTable OBJECT-TYPE SYNTAX SEQUENCE OF IbmdlswTConnGroupOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about multicast groups of which this DLSw is currently a member." ::= { ibmIROCroutingdlsw 1 } ibmdlswTConnGroupOperEntry OBJECT-TYPE SYNTAX IbmdlswTConnGroupOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single multicast group of which this DLSw is a member." INDEX { ibmdlswTConnGroupOperIndex } ::= { ibmdlswTConnGroupOperTable 1 } IbmdlswTConnGroupOperEntry ::= SEQUENCE { ibmdlswTConnGroupOperIndex INTEGER, ibmdlswTConnGroupOperRole INTEGER, ibmdlswTConnGroupOperJoinTime TimeTicks, ibmdlswTConnGroupOperConfigIndex INTEGER, ibmdlswTConnGroupOperInDataPkts Counter, ibmdlswTConnGroupOperOutDataPkts Counter, ibmdlswTConnGroupOperInDataOctets Counter, ibmdlswTConnGroupOperOutDataOctets Counter, ibmdlswTConnGroupOperInCntlPkts Counter, ibmdlswTConnGroupOperOutCntlPkts Counter, ibmdlswTConnGroupOperCURexSents Counter, ibmdlswTConnGroupOperICRexRcvds Counter, ibmdlswTConnGroupOperCURexRcvds Counter, ibmdlswTConnGroupOperICRexSents Counter, ibmdlswTConnGroupOperNQexSents Counter, ibmdlswTConnGroupOperNRexRcvds Counter, ibmdlswTConnGroupOperNQexRcvds Counter, ibmdlswTConnGroupOperNRexSents Counter } ibmdlswTConnGroupOperIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The index to the conceptual row of the table. Values are assigned by the agent and are not reused, but continue to increase in value." ::= { ibmdlswTConnGroupOperEntry 1 } ibmdlswTConnGroupOperRole OBJECT-TYPE SYNTAX INTEGER { peer (1), client (2), server (3), readonly (4), writeonly (5), readwrite (6), other (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The role that this DLSw plays within the group. The first three roles are used by the IBM multicast DLSw group feature. The next three roles are used when interoperating with DLSw Version 2 compliant partners that may not have the IBM group feature." ::= { ibmdlswTConnGroupOperEntry 2 } ibmdlswTConnGroupOperJoinTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time (in hundredths of a second) since this DLSw node last became a member of this group." ::= { ibmdlswTConnGroupOperEntry 3 } ibmdlswTConnGroupOperConfigIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this ibmdlswTConnGroupOperEntry. A management station can therefore normally examine both configured and operational information for this multicast group." ::= { ibmdlswTConnGroupOperEntry 4 } ------------------------------------------------------------------ -- Transport Connection Statistics ------------------------------------------------------------------ ibmdlswTConnGroupOperInDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages of type DATAFRAME received for this group." ::= { ibmdlswTConnGroupOperEntry 5 } ibmdlswTConnGroupOperOutDataPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages of type DATAFRAME transmitted for this group." ::= { ibmdlswTConnGroupOperEntry 6 } ibmdlswTConnGroupOperInDataOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets in Switch-to-Switch Protocol (SSP) messages of type DATAFRAME received for this group. Each message is counted starting with the first octet following the SSP message header." ::= { ibmdlswTConnGroupOperEntry 7 } ibmdlswTConnGroupOperOutDataOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets in Switch-to-Switch Protocol (SSP) messages of type DATAFRAME transmitted for this group. Each message is counted starting with the first octet following the SSP message header." ::= { ibmdlswTConnGroupOperEntry 8 } ibmdlswTConnGroupOperInCntlPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages received for this group which were not of type DATAFRAME." ::= { ibmdlswTConnGroupOperEntry 9 } ibmdlswTConnGroupOperOutCntlPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Switch-to-Switch Protocol (SSP) messages transmitted for this group which were not of type DATAFRAME." ::= { ibmdlswTConnGroupOperEntry 10 } ibmdlswTConnGroupOperCURexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CanUReach_ex messages sent for this group." ::= { ibmdlswTConnGroupOperEntry 11 } ibmdlswTConnGroupOperICRexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICanReach_ex messages received for this group." ::= { ibmdlswTConnGroupOperEntry 12 } ibmdlswTConnGroupOperCURexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CanUReach_ex messages received for this group." ::= { ibmdlswTConnGroupOperEntry 13 } ibmdlswTConnGroupOperICRexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICanReach_ex messages sent for this group." ::= { ibmdlswTConnGroupOperEntry 14 } ibmdlswTConnGroupOperNQexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent for this group." ::= { ibmdlswTConnGroupOperEntry 15 } ibmdlswTConnGroupOperNRexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received for this group." ::= { ibmdlswTConnGroupOperEntry 16 } ibmdlswTConnGroupOperNQexRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS_NQ_ex messages received for this group." ::= { ibmdlswTConnGroupOperEntry 17 } ibmdlswTConnGroupOperNRexSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS_NR_ex messages sent for this group." ::= { ibmdlswTConnGroupOperEntry 18 } ------------------------------------------------------------------ -- DLSw QLLC Link Station Table ------------------------------------------------------------------ ibmdlswQllcLsTable OBJECT-TYPE SYNTAX SEQUENCE OF IbmdlswQllcLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table to provide an address mapping from configured QLLC addresses to DLSw MAC and SAP addresses, and other configured QLLC station information." ::= { ibmIROCroutingdlsw 2 } ibmdlswQllcLsEntry OBJECT-TYPE SYNTAX IbmdlswQllcLsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The configured information for a single QLLC station." INDEX {ibmdlswQllcLsIfIndex, ibmdlswQllcLsQdomain, ibmdlswQllcLsQaddress} ::= { ibmdlswQllcLsTable 1 } IbmdlswQllcLsEntry ::= SEQUENCE { ibmdlswQllcLsIfIndex INTEGER, ibmdlswQllcLsQdomain INTEGER, ibmdlswQllcLsQaddress OCTET STRING, ibmdlswQllcLsChannel INTEGER, ibmdlswQllcLsLocalMac MacAddressNCIROC, ibmdlswQllcLsLocalSap OCTET STRING, ibmdlswQllcLsRemoteMac MacAddressNCIROC, ibmdlswQllcLsRemoteSap OCTET STRING, ibmdlswQllcLsPuType INTEGER, ibmdlswQllcLsBlkNum DisplayString, ibmdlswQllcLsIdNum DisplayString } ibmdlswQllcLsIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for the X.25 interface running QLLC through which this station is reached. This object is the same as the MIB-II ifIndex object." ::= { ibmdlswQllcLsEntry 1 } ibmdlswQllcLsQdomain OBJECT-TYPE SYNTAX INTEGER { pvc (1), svc (2) } ACCESS read-only STATUS mandatory DESCRIPTION "X.25 circuit type identifier, permanent or switched" ::= { ibmdlswQllcLsEntry 2 } ibmdlswQllcLsQaddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "For PVCs, this is the logical channel number dedicated to this X.25 circuit. For SVCs, this is the DTE address of the remote QLLC device (i.e., the address that the DLSw node places a call to or receives a call from)." ::= { ibmdlswQllcLsEntry 3 } ibmdlswQllcLsChannel OBJECT-TYPE SYNTAX INTEGER (0..4095) ACCESS read-only STATUS mandatory DESCRIPTION "Logical channel number for PVCs and connected SVCs. A value of zero indicates an SVC without a connected call." ::= { ibmdlswQllcLsEntry 4 } ibmdlswQllcLsLocalMac OBJECT-TYPE SYNTAX MacAddressNCIROC ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address that represents this QLLC station to other devices within the DLSw network." ::= { ibmdlswQllcLsEntry 5 } ibmdlswQllcLsLocalSap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The SAP that accompanies ibmdlswQllcLsLocalMac." ::= { ibmdlswQllcLsEntry 6 } ibmdlswQllcLsRemoteMac OBJECT-TYPE SYNTAX MacAddressNCIROC ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of a device in the DLSw network that this QLLC device can initiate a DLSw circuit to. If zero, the QLLC device cannot originate a DLSw circuit, but can only be the destination." ::= { ibmdlswQllcLsEntry 7 } ibmdlswQllcLsRemoteSap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The SAP that accompanies ibmdlswQllcLsRemoteMac. If zero, the QLLC device cannot originate a DLSw circuit, but can only be the destination." ::= { ibmdlswQllcLsEntry 8 } ibmdlswQllcLsPuType OBJECT-TYPE SYNTAX INTEGER { type1 (1), type2 (2), type4 (4), type5 (5), other (6) } ACCESS read-only STATUS mandatory DESCRIPTION "SNA Physical Unit type of the QLLC device." ::= { ibmdlswQllcLsEntry 9 } ibmdlswQllcLsBlkNum OBJECT-TYPE SYNTAX DisplayString (SIZE (3)) ACCESS read-only STATUS mandatory DESCRIPTION "SNA XID_0 block number for the QLLC device. A non-zero value implies that the DLSw node will generate an XID_0 on behalf of the device." ::= { ibmdlswQllcLsEntry 10 } ibmdlswQllcLsIdNum OBJECT-TYPE SYNTAX DisplayString (SIZE (5)) ACCESS read-only STATUS mandatory DESCRIPTION "SNA XID_0 id number for the QLLC device. A non-zero value implies that the DLSw node will generate an XID_0 on behalf of the device." ::= { ibmdlswQllcLsEntry 11 } ------------------------------------------------------------------ -- Frame Relay CLLM Statistics Table ------------------------------------------------------------------ frCLLMStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FrCLLMStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information about CLLM messages received from the switch." ::= { ibmIROCroutingfr 1 } frCLLMStatsEntry OBJECT-TYPE SYNTAX FrCLLMStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CLLM information for a particular virtual circuit." INDEX { frCLLMStatsIfIndex, frCLLMStatsDlci } ::= { frCLLMStatsTable 1 } FrCLLMStatsEntry ::= SEQUENCE { frCLLMStatsIfIndex INTEGER, frCLLMStatsDlci INTEGER, frCLLMStatsRcvds Counter } frCLLMStatsIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value identifying the Frame Relay interface to which this CLLM information pertains." ::= { frCLLMStatsEntry 1 } frCLLMStatsDlci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The DLCI value identifying the Frame Relay virtual circuit to which this CLLM information pertains." ::= { frCLLMStatsEntry 2 } frCLLMStatsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CLLM messages received which reported status on this virtual circuit." ::= { frCLLMStatsEntry 3 } ------------------------------------------------------------------ -- Frame Relay CLLM Cause Table ------------------------------------------------------------------ frCLLMCauseTable OBJECT-TYPE SYNTAX SEQUENCE OF FrCLLMCauseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information about CLLM message cause codes." ::= { ibmIROCroutingfr 2 } frCLLMCauseEntry OBJECT-TYPE SYNTAX FrCLLMCauseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CLLM cause information for a particular interface." INDEX { frCLLMCauseIfIndex } ::= { frCLLMCauseTable 1 } FrCLLMCauseEntry ::= SEQUENCE { frCLLMCauseIfIndex INTEGER, frCLLMCauseCode INTEGER } frCLLMCauseIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex value identifying the Frame Relay interface to which this CLLM cause information pertains." ::= { frCLLMCauseEntry 1 } frCLLMCauseCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cause code in the last CLLM message received on this interface." ::= { frCLLMCauseEntry 2 } ------------------------------------------------------------------ -- Frame Relay Simple Objects ------------------------------------------------------------------ frSimpleObjs OBJECT IDENTIFIER ::= { ibmIROCroutingfr 3 } frCLLMDlciList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..1024)) ACCESS read-only STATUS mandatory DESCRIPTION "The list of DLCIs contained in the last CLLM message received." ::= { frSimpleObjs 1 } frTrapStateFECN OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether the system produces the frrcvdFECN trap." DEFVAL { disabled } ::= { frSimpleObjs 2 } frTrapStateBECN OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether the system produces the frrcvdBECN trap." DEFVAL { disabled } ::= { frSimpleObjs 3 } frTrapStateCLLM OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether the system produces the frrcvdCLLM trap." DEFVAL { disabled } ::= { frSimpleObjs 4 } ------------------------------------------------------------------ -- IBM IROC Trap Definitions ------------------------------------------------------------------ ibmIROCtrapsfr OBJECT IDENTIFIER ::= { ibmIROCtraps 1 } frrcvdFECN TRAP-TYPE ENTERPRISE ibmIROCtrapsfr VARIABLES { frCircuitIfIndex, frCircuitDlci } DESCRIPTION "This trap indicates that a frame was received from the network on this virtual circuit and it indicated forward congestion." ::= 1 frrcvdBECN TRAP-TYPE ENTERPRISE ibmIROCtrapsfr VARIABLES { frCircuitIfIndex, frCircuitDlci } DESCRIPTION "This trap indicates that a frame was received from the network on this virtual circuit and it indicated backward congestion." ::= 2 frrcvdCLLM TRAP-TYPE ENTERPRISE ibmIROCtrapsfr VARIABLES { frCLLMCauseIfIndex, frCLLMCauseCode, frCLLMDlciList } DESCRIPTION "This trap indicates that a CLLM message was received from the network." ::= 3 ibmIROCtrapssys OBJECT IDENTIFIER ::= { ibmIROCtraps 2 } mosMemLow TRAP-TYPE ENTERPRISE ibmIROCtrapssys VARIABLES { proResMemHeapTotal, proResMemHeapNeverAlloc } DESCRIPTION "This trap indicates that the free heap amount has dropped below a given percentage of the total heap memory available. The default percentage is 10%, however this threshhold can be modified by the user via a patch variable." ::= 1 ibmIROCtrapsels OBJECT IDENTIFIER ::= { ibmIROCtraps 3 } elsTrap TRAP-TYPE ENTERPRISE ibmIROCtrapsels VARIABLES { proElsSubSysEventMsg } DESCRIPTION "When the routing subsystem ELS component is configured to generate SNMP traps, the following trap is generated. It contains a single varBind containing a text string in one of the two following formats. If ELS timestamping is enabled: hr:min:sec subsys_name.event_num: message_text For example - 09:32:56 IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc If ELS timestamping is disabled: subsys_name.event_num: message_text For example - IP.008: no rte 9.7.1.8 -> 9.7.4.3 dsc" ::= 2 END